Evaluation kit
DNL-N6 DevKit
For DNL-N6-32/64 and DNL-N6-32/64-R
Carrier for the DNL-N6. All SoM peripherals brought out, magnetics and RJ45 on this board. The PHY stays on the module.
Not for sale yet.
CAD not exported yet. Rotatable models of the SoM, the DevKit, and the SoM on the DevKit will load here.
Carrier
For the DNL-N6 SoM
RJ45
Magnetics on this board
MDI
From the SoM PHY
4–36 V
Feeds the module
Frozen and still open
Frozen
| Role | Eval carrier for the DNL-N6 |
|---|---|
| Ethernet | Magnetics and RJ45 here; PHY on the SoM |
| Power | Feeds 4–36 V to the module |
Still open
| Connectors | To be published with the design release |
|---|---|
| Mechanics | To be published with the design release |
On the kit vs on the SoM
On the SoM
- The DNL-N6 SoM (PHY, bucks, memories, MCU)
On the kit
- Magnetics and RJ45
- Connectors for the SoM edge: CSI-2, USB, SWD, SDMMC, UART, I2C, SPI, GPIO
- 4–36 V input to the module
Specifications
Kit figures. Connectors and mechanics wait for the design release.
Kit
| Order name | DNL-N6 DevKit |
|---|---|
| Slug | dnl-n6-dk |
| Fits | DNL-N6-32/64 and DNL-N6-32/64-R |
| Ethernet | Magnetics and RJ45 on the kit. MDI from the SoM PHY |
| Power | 4–36 V in, to the module bucks |
| Status | Design in progress |
The DevKit is how you try the module. It seats a DNL-N6 and brings the edge out to connectors, with magnetics and an RJ45 for the Gigabit PHY that already lives on the SoM.
A bare SoM is for a carrier you already have. Register interest on this page for the kit, or on DNL-N6 for a quantity of modules.
Register interest
This is not an order.